CHANGES IN INTERLINING FABRIC PROPERTIES DURING FUSING AND A STUDY OF ADHESION STRENGTH
Keywords:
fused assembly, garment interlining, shell fabric, standard deviation, breaking force, areal density,Abstract
The physical and mechanical properties of fused assemblies were determined; the analysis of changes in air permeability and areal density made it possible to predict them in advance with a known standard deviation. It was found that adhesion is statistically independent of the raw fabric structure and that the levers for controlling it lie at the adhesive coating and fusing stage — adhesive dot density, areal density of the shell fabric and interlining, and fusing conditions; the effect of weave also acts through the interaction of the interlining surface relief with the adhesive dots.
Downloads
References
1. Assortment, properties and technical requirements for clothing materials / ed. by K.G. Gushchina. – Moscow: Legkaya Industriya, 1978. – 160 p. (in Russian)
2. Abdullaev U.T., Yuldashev J.Q., Mirkhojaev M.M. Scientific substantiation of newcomposition interlining fabrics with specified stiffness: monograph. – Namangan: Usmon Nosir Media, 2020. – 116 p. (in Uzbek)
3. Mirxojayev M.M. Analysis of types of textile warp fabrics and their quality indicators // Technical Science and Innovation. – Tashkent: TDTU, 2023. – Special edition. – P. 146– 151.
4. GOST 24684-87. Clothing materials. Stiffness standards. – Replaces GOST 24684-81. – Introduced 30.06.1988. – Moscow: Izdatelstvo Standartov, 1997. – 24 p. (in Russian)
